|
|
| Description: |
|
The CAN Bus Extender is a device which receives and retransmits
all network packets from one side of a CAN bus network to the other. A CAN network's
rated maximum length is determined by cable characteristics and quality. With
the CAN Bus Extender these lengths can be doubled or tripled.
The CAN Bus Extender is also excellent for implementing long branches from a
CAN network's main trunk line. By using this device long loop-backs in a network's
architecture, can be avoided. This device is compatible with any CAN based network,
including DeviceNet.
|
|
AA |
| Documents
and Software: |
| [ |
Description
|
Version
|
Updated
|
Format
|
[ |
| |
Brochure |
1.0
|
06-01-2001
|
.pdf
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
|
jjj |
|
|
| Description: |
The OmniCon-LP is a newer version
of the original OmniCon programmable device.
The new features include:
- Low profile design enables control devices to be mounted directly into the conveyor
channel.
- Rotary switches, located on face of module, for quick adjustment of module's
MacID/Node address.
- Standard terminal connectors for all connections, allows users to use wide variety
of wire harness solutions. |
|
adssdads |
aa |
|
|
| Description: |
| The OmniCon is an 8 input/8 output(digital) micro-PLC device
that is designed for systems requiring highly distributable I/O located close
to sensors and actuators, but also desire the ability to manage information locally.
This device utilizes the popular DeviceNet protocol for network communication.
The devices are programmable through the SuperLogic
software, a ladder logic based programming application. The SuperLogic software
features are optimized for controlling motorized roller conveyor systems. Consequently,
the OmniCon is the perfect solution for any 24VDC brushless motorized roller conveyor
application. |
|
aa |
jjj |
|
|
| Description: |
| This software package enable the configuration and programming
of the OmniCon and OmniCon-LP control devices. SuperLogic
is a ladder logic based programming application, employing industry standard functionality
and syntax. It incorporates a drag-and -drop graphical interface to create a user-friendly
programming environment. SuperLogic also incorporates program monitoring capabilities
which allow real-time debugging of a system application. |
|
AA |
jjj |
|
|
| Description: |
This is a cost-effective control device which was designed
specifically for controlling 24VDC brushless accumulation conveyor. The OmniAccum
is preprogrammed with a configurable zero-pressure accumulation program. The configuration
software is bundled with the device and enables system parameters to be adjusted.
Peer-to-Peer communication allows devices to be stand-alone, PC-Host not needed
for operation,on the network. The devices communicate via DeviceNet open protocol.
Therefore, these devices can be integrated with other devices on the same network.
|
|
AA |
jjj |
|
|
| Description: |
This software package enables the configuration of the OmniAccum
control devices. The following parameters can be set:
Upstream and Downstream Node ID
Bus Speed (125, 250, or 500kps)
Timers for zones (1-8)
Mode of operation (Slug or Singulation)
This software is bundled with the FREE SuperLogic software. |
|
AA |
| Documents
and Software: |
The technical documentation for the OmniAccum configuration software
is included in the OmniAccum manual.
The OmniAccum configuration software is bundled with SuperLogic, which is available
above. |
jjj |
|
|
| Description: |
| This network card functions as a DeviceNet scanner and acts
as the gateway between the network devices and the control/monitoring software
running on the computer. The card is dual channel, enabling one card to interface
two separate networks. A maximum of 4 cards can be installed into a single computer.
As a result, 504 devices on 8 networks can be controlled/monitored from one master
control computer. The OmniNet interface card provides end-users, system integrators,
and OEM's a powerful solution for interfacing DeviceNet networks. |
|
AA |
| Documents
and Software: |
| [ |
Description
|
Version
|
Updated
|
Format
|
[ |
| |
Drivers |
call
|
call
|
.pdf
|
|
| |
OPC Server |
call
|
call
|
.pdf
|
|
| |
Brochure |
3.0
|
05-11-2001
|
.pdf
|
|
| |
|
|
|
|
|
|
jjj |
|
